Images are representations only.

Fuel Island-Friendly Mini-Bulk Tanks

Price
Request a Quote
Stock
Description
  • Capacity: 400 Gallon Mini-Bulk
  • Dimensions: 38" Width x 150" Length x 68" Height
  • Capacity: 400 Gallon Mini-Bulk
  • Dimensions: 38" Width x 150" Length x 68" Height

Specifications

Standards & Approvals

  • ISO 22241 - 3 & 4
  • PEI RP1100
  • CSA Listed - C22.2, U/L 508, ANSI/UL Std. No. 50
  • Tank Patent No: US 9,669,991 B1

Operating Temperature

  • -22°F/-30°C to 130°F/54°C

Size & Dimensions

  • Fueling Island Friendly Widths
  • 38” Width x 150” Length x 68” Height
  • 44” Width x 150” Length x 106” Height

Tank & Container

  • Triple wall containment
  • Single wall polyethylene primary tank
  • Double wall HDLPE polyethylene containment shell: UV8 protected, corrosion proof and maintenance free
  • True 400/1000 gallon capacity

Heating & Insulation

  • Redundant heating
  • R16 industrial-grade insulation on bottom, sides and top of tank
  • 400 gallon: 200 watt tank pad heaters
  • Automatic thermostat
  • 1000 gallon: 450 Watt Immersion Heaters

Electronics

  • Two (2) or Three (3) 20 amp 115V AC circuits required
  • Local digital readout tank gauge mounted weatherproof/corrosion proof enclosure displaying product volume

Pump

  • Submersible pump or optional manifolded submersible pumps
  • No priming required
  • Rated for 400,000 start/stop cycles
  • Up to 18 GPM (recommended max per dispenser is 10 gpm)

Security/Accident Prevention

  • Lockable fill access compartment
  • 2” fill port with stainless locking valve located in sealed fill box
  • Mechanical overfill prevention
  • Electronics located outside of tank enclosure to eliminate vapor related problems
  • Impact resistant outer tank & triple wall secondary containment
  • Primary and secondary tank vents
  • Dial thermometer in the fill access compartment for monitoring tank temperature
  • Option: High & low temperature & product alarms
  • Option: 3rd party aboveground tank gauge including (but not limited to) Veeder Root, Incon and Centuron

Fill Inlets

  • Heated and insulated inlet plumbing
  • 2” with ball valve and check valve
  • Option: 2” stainless steel drybreak (Parker, OPW or TODO)

Installation

  • Forklift compatible
  • Pressure-tested before shipment
  • Completely pre-piped and wired
  • Anchor kit