Description
- Input for RTD, TC, mV, linear resistance, mA, and V
- 3.75 kVAC galvanic isolation
- 4...20 mA loop output
- 1- and 2-channel versions
- ATEX Ex / I.S. version
- DIN rail mounting
- The 5131 transmitter can be configured with a standard PC and the Loop Link communications unit.
- The 2-channel version has full galvanic isolation between the channels.
- Separation of circuits in PELV/SELV installations.
- I.S. barrier for temperature sensors, potentiometers and current / voltage signals.
Configure
Specifications
Specifications
Brand
Approvals & Certifications
- ATEX 2014/34/EU Demko 99-ATEX-124572, II (1) GD [EEx ia] IIC
- EAC Ex TR-CU 012 / 2011 RU C-DK.GB08.V.00410
- EAC TR CU 020/2011
- EMC 2014/30/EU
- LVD 2014/35/EU
Calibration
- 20° to 28° C (68° to 82° F)
Environmental Protection
- IP20
Humidity
- < 95 % Relative Humidity, Non-Condensing
Load
- ≤ (Vsupply-7.5) / 0.023 ohms
Output
- 4-20 mA Signal Range
Response Time
- 250 milliseconds to 60 seconds mA/V Input (Programmable)
- 400 milliseconds to 60 seconds (0 to 90 %, 100 to 10 %)
RTD Type
- Linch R
- Ni100
- Pt100
Supply Voltage
- 7.5-35 Vdc
Temperature Range
- -20° to 60° C (-4° to 140° F)
Applications
Applications
- Independent channel jumper selectable inputs for current/voltage or temperature.
- Current input programmable in range the 0...100 mA and voltage inputs in the range 0...250 VDC.
- Linearized, electronic temperature measurement with RTD or TC sensor.
- Conversion of linear resistance variation to a standard analog current / voltage signal, for example from solenoids and butterfly valves or linear movements with attached potentiometer.
- 4- or 3-wire connection with automatic cable compensation or 2-wire connection with programmable cable compensation.
- Configurable sensor error detection including NAMUR NE43.