Images are representations only.

2286 Signal Controller

Brand: PR Electronics
  • Multiple functions
  • Programmable from front
  • 3-digit LED display
  • Analog or Pt100 input
  • Relay outputs
  • Max. 50% offset
Features
  • Programmed via the user interface which consists of a 3-digit display and 3 function keys in the front panel.
  • The A and B channels can be freely programmed via the front keys and JP1 and JP2 to current in the range 0...20 mA or voltage in the range 0...10 VDC.
  • Linearized Pt100 temperature input in the range -99...+850°C with 3-wire connection.
  • PID on/off controller with accurate setting of the regulation parameters XP (proportional band), TI (integrating time) and TD (differentiating time).
  • Functions include PI step and-band controller, dl/dt function and comparator or trip amplifier with an external setpoint.
  • 2 relay outputs with a make contact connected to a common point.
  • Relay outputs can be installed in PELV/SELV circuits.
  • Mounting for a standard 11-pole socket which can be adapted for DIN rail or plate use with PR’s 7023 adaptor and 7024 mounting keying.
show more
  • Multiple functions
  • Programmable from front
  • 3-digit LED display
  • Analog or Pt100 input
  • Relay outputs
  • Max. 50% offset
Features
  • Programmed via the user interface which consists of a 3-digit display and 3 function keys in the front panel.
  • The A and B channels can be freely programmed via the front keys and JP1 and JP2 to current in the range 0...20 mA or voltage in the range 0...10 VDC.
  • Linearized Pt100 temperature input in the range -99...+850°C with 3-wire connection.
  • PID on/off controller with accurate setting of the regulation parameters XP (proportional band), TI (integrating time) and TD (differentiating time).
  • Functions include PI step and-band controller, dl/dt function and comparator or trip amplifier with an external setpoint.
  • 2 relay outputs with a make contact connected to a common point.
  • Relay outputs can be installed in PELV/SELV circuits.
  • Mounting for a standard 11-pole socket which can be adapted for DIN rail or plate use with PR’s 7023 adaptor and 7024 mounting keying.

Specifications

Approvals & Certifications

  • CE
  • EAC TR CU 020/2011
  • EMC 2014/30/EU
  • IEC 61140
  • LVD 2014/35/EU

Consumption

  • 2.5 W

Dimensions

  • 3.17” x 1.40” x 3.33” {80.5 x 35.5 x 84.5 mm (H x W x D)} - D is without Pins

Environmental Protection

  • IP50

Humidity

  • < 95 % Relative Humidity, Non-Condensing

Input

  • 0-10 Vdc
  • 0-20 mA
  • 200 mV - Min. Measurement Range (Span)
  • 4 mA - Min. Measurement Range (Span)
  • Nominal 1.25 mA - RTD Sensor Current

Isolation

  • 3.75 kVac/250 Vac - Test/Working

Linearization

  • < 0.1 % of Span - Linearity Error

Operating Time

  • 0 to 999 seconds - Integrating & Differentiating Time

Output Noise

  • Minimum 60 dB - Signal to Noise Ratio

Power Requirement

  • Maximum

Power Supply Effect

  • < ± 0.002 % of Span/ %V

Relay Output

  • 1 A at 24 Vdc - Max.
  • 250 Vrms - Max.
  • 500 VA - Max.
  • Maximum

Resistance

  • 10 megaohms - Voltage Input Resistance
  • 25 ohms - Max.
  • 50 ohms - Current Input Resistance

Resolution

  • 20-bit - Signal Dynamics, Input

Response Time

  • < 60 milliseconds

RTD Type

  • Pt100 (2286B)

Supply Voltage

  • 19.2-28.8 Vdc
  • 2.5 Vdc ± 0.5 % at 15 mA - Auxiliary Voltages

Temperature Effect

  • < ± 0.01 % of Span/°C

Temperature Range

  • 20° to 28° C (68° to 82.4° F) - Calibration Temperature
  • -20° to 60° C (-4° to 140° F)

Zero Offset

  • 50 % of Selected, Max.

Applications

  • PID on/off controller, PI step controller or 3-band controller with analog or Pt100 input.
  • As trip amplifier with setpoint adjustment through external current / voltage signal with neutral zone surrounding the setpoint.