Images are representations only.

4184 Universal Uni-/Bipolar Signal Transmitter

Brand: PR Electronics
Request a Quote
  • Measures DC inputs up to ±300 V / ±100 mA with spans as low as 25 mV / 0.5 mA
  • Passive/active current output and buffered voltage output
  • Fast < 20 ms response time and excellent 0.05% accuracy
  • Universally powered by 21.6…253 VAC / 19.2...300 VDC
Features
  • The latest analog and digital techniques are used to obtain maximum accuracy and immunity to interference.
  • Possibility of output safety readback by selecting S4...20 mA output.
  • The current output can drive up to 1000 Ohms, with an adjustable response time of 0.0…60.0 seconds.
  • Exceptional mA output load stability of < 0.001% of span / 100 Ohm.
  • Meets the NAMUR NE21 recommendations, ensuring high accuracy in harsh EMC environments.
  • Meets the NAMUR NE43 recommendations, allowing the control system to easily detect a sensor error.
  • Tested to a high 2.3 kVAC, 3-port galvanic isolation level.
  • Excellent signal to noise ratio of > 60 dB.
show more
  • Measures DC inputs up to ±300 V / ±100 mA with spans as low as 25 mV / 0.5 mA
  • Passive/active current output and buffered voltage output
  • Fast < 20 ms response time and excellent 0.05% accuracy
  • Universally powered by 21.6…253 VAC / 19.2...300 VDC
Features
  • The latest analog and digital techniques are used to obtain maximum accuracy and immunity to interference.
  • Possibility of output safety readback by selecting S4...20 mA output.
  • The current output can drive up to 1000 Ohms, with an adjustable response time of 0.0…60.0 seconds.
  • Exceptional mA output load stability of < 0.001% of span / 100 Ohm.
  • Meets the NAMUR NE21 recommendations, ensuring high accuracy in harsh EMC environments.
  • Meets the NAMUR NE43 recommendations, allowing the control system to easily detect a sensor error.
  • Tested to a high 2.3 kVAC, 3-port galvanic isolation level.
  • Excellent signal to noise ratio of > 60 dB.
Close

Specifications

Brand

Approvals & Certifications

  • EAC
  • SIL
  • cULus, UL 508 E248256
  • LVD 2014/35/EU
  • EMC 2014/30/EU
  • RoHS 2011/65/EU
  • EAC TR-CU 020/2011

Environmental Protection

  • IP20

Humidity

  • < 95 % Relative Humidity, Non-Condensing

Operating Temperature

  • -20° to 60° C

Storage Temperature

  • -20° to 85° C

Calibration Temperature

  • 20° to 28° C

Mounting

  • DIN Rail EN 607 15/35 mm

Supply Voltage

  • 21.6-253 Vac, 50/60 Hz
  • 19.2-300 Vdc

Required Power

  • ≤ 2.5 W

Response Time

  • < 20 milliseconds

Accuracy

  • Better than 0.05 % of Selected Range

Input Signal

  • ± 100 mA
  • ± 300 Vdc

Resistance

  • Calibration: 5 k Ω
  • Minimum Potentiometer: 200 Ω

Output Signal

  • 0 to 23 mA (Unipolar)
  • -23 to 23 mA (Bipolar)
  • Custom Config. Output Rrange: ± 20 mA
  • Minimum Signal Range: 4 mA
Close

Applications

  • Fast < 20 ms response time for measuring signals produced by torque, position, current & acceleration sensors.
  • User configurable bipolar or unipolar I/O means the 4184 is suitable for nearly any DC voltage or current conversion.
  • Freely programmable between ±300 VDC and ±100 mA.
  • The excitation source allows measurement of a 2-wire or 3-wire transmitter, or a potentiometer.
  • Converts narrow bipolar inputs to wide bipolar or unipolar outputs, e.g., ±1 volt input = ±10 volt or 4...20 mA output.
  • Configurable input limits control the output value for increased safety.
  • ±20 VDC buffered voltage output for controlling devices like the PVG 32 valve (6...18 VDC).
  • Designed according to strict safety requirements and is therefore suitable for application in SIL 2 installations.
  • Suitable for the use in systems up to Performance Level “d” according to ISO-13849.
Close