Images are representations only.
Description
- Room temperature measurement
- Complete with sensor and transmitter
- 4...20 mA output in 2-wire connection
- Easy mounting
- Measurement range 0...70°C
- Supply 8...35 VDC
- A precision Pt100 sensor with a small mass is mounted on the transmitter input thereby achieving a fast response time.
- The 2-wire output signal of 4...20 mA is proportional and linear to the temperature value that influences the built-in sensor.
- A reversed output signal of 20...4 mA may be ordered.
- A number of different sensor error detection options may be ordered.
- Protected against polarity reversal.
- The bottom of the cabinet can be attached to a wall by two screws.
- Visible or hidden cable access.
Configure
Specifications
Specifications
Brand
Accuracy
- ± 0.3° C (± 0.6° F)
Approvals & Certifications
- EAC TR CU 020/2011
- EMC 2014/30/EU
Calibration
- 20° to 28° C (68° to 82° F)
Current
- 0.2 mA
Environmental Protection
- IP30
Humidity
- < 95 % Relative Humidity, Non-Condensing
Load
- ≤ (Vsupply-8) / 0.023 ohms
Output
- 4-20 mA Signal Range
Response Time
- 10 seconds (@ 0.5 m/sec)
Supply Voltage
- 8.0-35 Vdc
Temperature Range
- 0° to 70° C (32° to 158° F)
Applications
Applications
- Electronic temperature measurement in for instance control rooms, offices, heating plants, factories, living rooms, and similar dry rooms.
- Suitable as a transmitter for controllers, trip amplifiers, displays, or superior SCADA systems.
